Polyvance Flextex VT Standard Kit – 3804K

You can now confidently repair and refinish many damaged textured plastic parts, reducing cycle time and severity.
Flextex VT allows you to vary the size of the texture, from fine to coarse, by varying the paint reduction ratio and the spray technique.

Polyvance has packaged together as a kit the Flextex VT Texture Material and the National Rule reducer. This kit takes the guesswork out of what to buy and allows you to simulate the OEM texture, from heavy to light, by simply changing the amount of reducer in the mix.

• Simulates OEM textures
• Satin black finish
• Vary texture size by varying reduction ratio (see mix ratios below)
• Compatible with nearly all top coat systems
• Top coating not required if black texture is desired

Includes:

• 1 Quart Flextex VT Texture Coating
• 1 Quart Flextex VT Standard National Rule Reducer

Texturing/Mix Ratios

Use a test panel for determining the texture desired. Painting with limited amounts of reducer, larger nozzle, and low air pressure at the gun will produce the coarsest texture. For smaller textures, reduce the paint with the appropriate Flextex VT reducer.

• Heavy Texture: Spray Flextex VT mixed 8:1 (paint:reducer) using a 1.8 mm spray gun at 25 psi.
• Medium Texture: Spray Flextex VT mixed 3:1 (paint:reducer) using a 1.4 mm spray gun at 25 psi.
• Fine Texture: Spray Flextex VT mixed 1:1 (paint:reducer) using a 1.4 mm spray gun at 25 psi.