WORKPRO Air Die Grinder, 1/4-Inch Pneumatic Straight Die Grinder, 25000RPM, Air-Powered Die Grinder 1/4″ & 1/8″ Collets Included

1/4” Air straight Die grinder: This air die grinder features a straight head, equipped with a 1/4” collet and a 1/8” collet, which could hold a variety of grinding bits, ideal for all kinds of materials.

High Free Speed: The Pneumatic straight die grinder operates at a maximum speed of 25,000 RPM continuous power with an air compressor, which allows for precision cutting, grinding, shaping and sanding. Operating pressure: 90psi (6.3bar). Air consumption: 85.5l/min (3cfm).Note: Using the sealant tape to avoid air leakage.

Rear Exhaust: A rear exhaust makes the lower sound level possible, while also ensuring that the exhaust isn’t hitting the operator in the face.

Safety Lock Mechanism

This pneumatic die grinder has a special latch attached to the trigger mechanism that acts as a child safety lock to prevent the tool from accidentally starting up.

Rear Exhaust

A rear exhaust makes the lower sound level possible, while also ensuring that the exhaust isn’t hitting the operator in the face.

A 1/4” Collet and a 1/8” Collet

This straight air die grinder is equipped with a 1/4” collet and a 1/8” collet, which could hold a variety of grinding bits, ideal for all kinds of materials.

11.5mm and 17mm Chuck Key

Lubricant

1/4” Air inlet diameter